Serial number
Equipment function
Parameters
Remarks
1
UV to spurt the code
1, printing content: one dimensional code, two-dimensional code, drugsupervision code, security code, pictures, text, personalized digital, serial number, database;
2, printing two-dimensional code information with web site, LOGE and picture;
3, printing width: 36MM 72MM;
4, resolution: 360 DPI 720 DPI longitudinal, transverse adjustable;
5, the printing speed: a 40 m / min;
6, printing material: Polish, coated cardboard, PP, PET, PVC, PETG etc.
7, the machine´s operating width 150MM, the minimum operating width 30MM;
8, according to customer requirements with a fixed prefix or suffix in theprinting content;
9, the working speed: ≥ 10000 tickets / hour;
The number of nozzles can be extended, the most extended 16.
2
UID read
1 module frequency: 13.56M, HZ, 125K HZ;
2, module communication protocol: ISO 1569314443A/B;
3, the working speed: 7000 tickets / hour;
4, the software settings can read UID, according to the different way: 10 casespositive, reverse 10, WG26, WG34, ABA+WG26, 8 positive, 8 negative;
The read number file save.
3
Write magnetic
1, the magnetic resistance: 300 OE------2750 OE;
2, write magnetic density: 210 DPI 75DPI/210DPI 210 DPI;
3, write magnetic track: 123 rail, high / low resistance to change;
4, write magnetic mode: equipped with two write magnetic module and a readcheck module, the card´s positive / negative magnetic writing, writing andprinting does not meet the magnetic in the side of the;
5, the production speed: 5000 tickets / hour;
6, the software can be set to print the content and writing magnetic contentconsistent and were calling different database files, data printing content can also be set in any orbit;
7, can be set to bad card number jumping and not jump operation, writemagnetic data into barcode printing;
6
M1 card change password and data writing
1, write the chip type: S50\S70\ Fudan \ Kun Rui
2, to change the 40 sector of the initial password;
3, M1 card for a single block of data is written, there are three ways: decimal,hexadecimal, ASCLL code sixteen;
4, read and write can be converted into a 7 format for transmission to the inkjet printing, example: forward, reverse 10 10, WG26, WG34, ABA+WG26, 8positive, 8 negative;;
5, up to four pieces of one-time write data and change;
6, support the card is not successful, jump and don´t jump number function;
7, the working speed: 3000-4000 / hour;